Home
Help
Search
Login
Register
Twin Commander Site
News:
Added Links For Twin Commander and Facebook Pages
Login
|
Register
Twin Commander
»
General Category
»
Instructional
»
Installing New Bungees
« previous
next »
Print
Pages: [
1
]
Author
Topic: Installing New Bungees (Read 6406 times)
ghancock
Administrator
Hero Member
Posts: 1152
Installing New Bungees
«
on:
September 30, 2016, 10:05:45 pm »
Here are a couple videos I recorded while removing and installing new bungee chords on the main gear tonight.
http://www.youtube.com/watch?v=E7taF4dJSgA
http://www.youtube.com/watch?v=J8mET7mDS8I
Logged
--glenn
You can't win an argument with an ignorant person, they'll just drag you down to their level and beat you with experience.
Junkman
Newbie
Posts: 1
Re: Installing New Bungees
«
Reply #1 on:
June 20, 2018, 02:13:48 am »
The screw driver method isn’t the best as it will slip and it will scratch. A better method is once the upper roller is installed with the new bungee; use a 1/4” or 3/8” rope. Make a loop and loop it through the bungee then pull....pull hard and have a bar through the rope so you can use both hands. Did I mention pull hard. You can maneuver the bungee onto the the lower roller and the rope can slip out afterwards.
Logged
Adam Frisch
Administrator
Hero Member
Posts: 1656
Re: Installing New Bungees
«
Reply #2 on:
June 20, 2018, 11:04:12 am »
Just had them changed on mine, too. Always wondered how it's done.
Logged
Slumming it in the turboprop world - so you don't have to.
Steve binnette
Hero Member
Posts: 552
Re: Installing New Bungees
«
Reply #3 on:
June 20, 2018, 12:25:00 pm »
Thanks, good info. How long is the expected life? I am not sure on how to know they are worn out. Do they need replacing when you can squeeze them together and they touch.
Logged
Adam Frisch
Administrator
Hero Member
Posts: 1656
Re: Installing New Bungees
«
Reply #4 on:
June 20, 2018, 01:36:47 pm »
On the piston models it's replace each annual. I think that's good practice, even if you're on an hourly program on the turbines. They're cheap anyway and quick to change.
Logged
Slumming it in the turboprop world - so you don't have to.
donv
Administrator
Hero Member
Posts: 3220
Re: Installing New Bungees
«
Reply #5 on:
June 20, 2018, 02:01:19 pm »
We had a discussion about the bungees at my last recurrent. If they're dry and not too squishy, they should be okay. Last time I had one changed, only one was bad but we changed both. I have the other one in my baggage compartment, just in case.
Logged
SKYFLYER
Administrator
Hero Member
Posts: 570
Re: Installing New Bungees
«
Reply #6 on:
June 20, 2018, 06:52:34 pm »
I have always changed mine (all 4) every year. They are just a big o-ring with nylon webbing around it and exposed to ALL the elements ALL the time.
I have no idea what a weak or worn out one would feel like.
Logged
Print
Pages: [
1
]
« previous
next »
Twin Commander
»
General Category
»
Instructional
»
Installing New Bungees